10000 MILE MAINTANCE

 Change Engine Oil & Filter
 Inspect Air Cleaner and Service as Required
 Change Primary Chaincase Lubricant and Clean Magnetic Drain Plug, Check and Adjust Primary Chain
 Check Clutch Adjustment
 Change Transmission Lubricant and Clean Magnetic Drain Plug
 Check and Adjust Belt Drive
 Lube The Brake/Shift Lever Bearings* and Speedometer Cable
 Check Rear Brake Pedal Adjustment
 Inspect Brake Pads and Disc For Wear
 Check Brake Fluid Reservoir levels and Condition
 Inspect Oil and Brake Line System For Leaks
 Lubricate the Following: Front Brake and Hand Lever, Throttle Control Cables, Clutch Lever Control & Hand Lever and Jiffy Stand
 Lubricate and Adjust all Springer Steering Head Bearings (All Models)
 Check, Adjust Operation of Enrichener*
 Inspect Fuel Valve, Lines & Fittings For Leaks
 Check Fuel Tank Filter Screen (Carbureted Only)
 Check Tire Pressure And Inspect Tread
 Check Wheel Spoke Tightness*
 Check Battery Electrolyte Level* and Clean Battery Connections
 Check Operation of All Electrical Equipment and Switches
 Check Cruise Control Disengage Switch & Other Components*
 Change Spark Plugs
 Repack Wheel Bearings With Grease*
 Change Front Fork Oil*
 Repack Rear Fork Bearings*
 Check Shock Absorbers
 Check Rear Fork Pivot Nut*
 Inspect Windshield Bushings ( Road King)
 Lubricate Hinges, Latches-Fuel Door, Tour-PaK, Saddlebags*
 Check ignition Timing and Vacuum Hose*
 Check Air Suspension- Pressure, Operation and Leakage*
 Check Stabilizer Links* and Engine Mounts
 Check Tightness Of All Fasteners Except Engine Head Bolts.
 Check Engine Idle Speed Adjustment
 Road Test
*If Applicable